火力演进与陆军战术变革的回顾

自从火药发明并应用于军事领域之后,战争便逐渐步入热兵器时代。此后,陆军火力随着武器装备的发展不断发生变化,陆军战术因此在400余年的时间里经历了4次大的变革,分别是前装药滑膛火器时期的线式和纵队战术、后装药线膛火器时期的散兵线战术、机械化系列火器时期的诸兵种合同战术和信息促成火器融合时期的多军种联合战术。     

战术指挥情报终端的插件式软件框架设计

复杂多变的现代战场环境要求指挥信息系统在满足基本作战需求的前提下,还应具备功能的高可伸缩性。以该军事需求为牵引,提出了一种以开源跨平台开发库Qt为基础平台的、基于微内核思想的QPAF插件式软件框架设计方法,深入阐述了QPAF的系统架构、插件扩展及管理机制以及框架运行机理,详细介绍了QPAF及其插件的实现方法。在某边境防务战术指挥情报终端的应用结果表明,QPAF框架设计方法同时兼顾了系统的稳定性与灵活性,使软件具备了很强的动态演化能力。     

Opening behavior of PELE perforation on reinforced concrete target

Impact velocity (v0), target strength (fc) and target thickness (hc) are important factors affecting opening damage ((D)) of PELE penetration into RC target. In this paper, based on the three influence factors of v0, fc and hc, experimental and numerical simulation studies on PELE penetration into RC target were carried out. The study results show that: (1) Since interaction force (or penetration resistance) between pro-jectile and target is positively correlated with v0 and fc, with the increase of v0 and fc, deformation mode of jacket is changed from small bending deformation to large bending deformation and then to curling deformation. Therefore, the variation of jacket deformation mode causes opening diameter of RC target to increase first and then to decrease. It is found that the two factors approximately satisfy a quadratic function relationship, respectively. (2) For PELE projectile penetrating RC targets with thickness of 80—400 mm, the opening diameter of six sets of RC targets grows from 240 to 500 mm, and hc with (D) approximately satisfy a linear relationship. (3) Based on the above study results, the relationship be-tween two dimensionless parameters (I= (mv20/d31fc) and H= hc/l ) and dimensionless opening diameter ((D)/d1) was determined. Combined with the results of previous research, a dimensionless opening diameter model (D)/d1=f1(Q,G,I)f2(H) was established. By tests verified, the test results are all within ±10％error of the theoretical model, which verifies the accuracy of the model.     

Interval uncertain optimization for damping fluctuation of asegmented electromagnetic buffer under intensive impact load

Aiming at the problems of demagnetization effect of electromagnetic buffer (EMB) caused by high ve-locity under intensive impact load and the difficulty and error of machining composite thin-walled long tube, a segmented EMB is proposed. The inner tube and air-gap are divided into initial segments and the traversing segments. Through theoretical analysis, impact test and simulation, it can be found that the RRF curve has two peaks. Firstly, in order to reduce the resultant resistance force (RRF) peaks, the sensitivity analysis based on optimal Latin hypercube design (OLHD) and polynomial regression was performed. The results show that the smallest contribution ratio to the dynamic response is the seventh and ninth segments of the inner tube, which are less than 1％. Then, fully considering the uncertain factors, important parameters are selected for uncertain optimization after sensitivity analysis. The in-terval order and interval probability degree methods are used to establish interval uncertain optimiza-tion model of the RRF considering robustness. The model was solved using an interval nested optimization method based on radial basis function (RBF) neural network. Finally, the Pareto front is obtained and numerical simulation is performed to verify the optimal value. It indicates that the two kinds of RRF peak is obviously reduced, and the optimization object and strategy are effective.     

Rigid elliptical cross-section ogive-nose projectiles penetration into concrete targets

The elliptical cross-section ogive-nose projectile (ECOP) has recently attracted attention because it is well suited to the flattened shape of earth-penetrating weapons. However, the penetration performance of ECOPs has not been completely understood. The objective of this study was to investigate the pene-tration performance of ECOPs into concrete targets using a theoretical method. A general geometric model of ECOPs was introduced, and closed-form penetration equations were derived according to the dynamic cavity-expansion theory. The model was validated by comparing the predicted penetration depths with test data, and the maximum deviation was 15.8％. The increment in the penetration depth of the ECOP was evaluated using the proposed model, and the effect of the major—minor axis ratio on the increment was examined. Additionally, the mechanism of the penetration-depth increment was inves-tigated with respect to the caliber radius head, axial stress, and resistance.     

Pressure relief of underground ammunition storage under missile accidental ignition

Safety of underground ammunition storage is an important issue, especially during the accidental ignition of missiles. This work investigates the pressure and temperature distribution of the multi-layer underground ammunition storage with a pressure relief duct during the accidental ignition process of the missile. A large-scale experiment was carried out using a multi-layered restricted space with a pressure relief duct to simulate the underground ammunition store and a solid rocket motor to simulate the accidental ignition of the missile. The results show that when the motor gas mass flow increased by 5.6 times, the maximum pressure of the ammunition storage increased by 5.87 times. At a certain motor flow rate, when the pressure relief exhaust area at the end of the relief duct was reduced by 1/2, the maximum pressure on the first layer did not change. But the rate of pressure relief was reduced and the time delayed for the pressure of ammunition store to drop to zero. In this experiment, when the motor ignition position was located in to the third layer ammunition chamber, the maximum pressure was reduced by 32.9％ and also reduced the rate of change of pressure. In addition, for the experimental conditions, the theoretical analysis of the pressure relief of the ammunition storage is given by a simplified model. Based on the findings, some suggestions to the safety protection design of ammunition store are proposed.     

Effect of the end cap on the fragment velocity distribution of a cylindrical cased charge

The prediction of the fragment velocity distribution of a cylindrical cased charge with end caps is one of the key issues to assess the damage efficiency of the warhead. However, limited work has been con-ducted to predict the fragment velocity distributions along the axis of cylindrical cased charges with end caps. This paper presents a study of the velocity distribution of fragments caused by the explosion of a cylindrical cased charge with end caps. The fragment velocity distribution and the end cap velocity were determined by an X-ray radiography method, and the axial fragment distribution was determined by witness plates. It was found that the velocities of fragments, especially near the edge, were increased when the end caps were added, and the position of maximum velocity is closer to the non-detonation end. The fragment velocities were increased, and the fragment projection range was decreased with the increase of the thickness of the end cap. A formula for fragment velocity distributions of a cylindrical cased charge with end caps, which is based on Huang's formula, was proposed by the theoretical analysis and data fitting and validated experimentally. The results indicate that the proposed formula is accurate in predicting the fragment velocity distribution along the axis of a cylindrical cased charge with end caps detonated at one end.     

Experimental investigation on enhanced damage to fuel tanks by reactive projectiles impact

Enhanced damage to the full-filled fuel tank,impacted by the cold pressed and sintered PTFE/AL/W reactive material projectile(RMP)with a density of 7.8 g/cm3,is investigated experimentally and theoretically.The fuel tank is a rectangular structure,welded by six pieces of 2024 aluminum plate with a thickness of 6 mm,and filled with RP-3 aviation kerosene.Experimental results show that the kerosene is ignited by the RMP impact at a velocity above 1062 m/s,and a novel interior ignition phenomenon which is closely related to the rupture effect of the fuel tank is observed.However,the traditional steel projectile with the same mass and dimension requires a velocity up to 1649 m/s to ignite the kerosene.Based on the experimental results,the radial pressure field is considered to be the main reason for the shear failure of weld.For mechanism considerations,the chemical energy released by the RMP enhances the hydrodynamic ram(HRAM)effect and provides additional ignition sources inside the fuel tank,thereby enhancing both rupture and ignition effects.Moreover,to further understand the enhanced ignition effect of RMP,the reactive debris temperature inside the kerosene is analyzed theoretically.The initiated reactive debris with high temperature provides effective interior ignition sources to ignite the kerosene,resulting in the enhanced ignition of the kerosene.     

Blast resistance evaluation of urban utility tunnel reinforced with BFRP bars

To improve corrosion-resistance of shallow-buried concrete urban utility tunnels(UUTs),basalt fiber reinforced polymer(BFRP)bars are applied to reinforce UUTs.As the UUT must have excellent survival capability under accidental explosions,a shallow-buried BFRP bars reinforced UUT(BBRU)was designed and constructed.Repetitive blast experiments were carried out on this BBRU.Dynamic responses,damage evolutions and failure styles of the BBRU under repetitive explosions were revealed.The tunnel roof is the most vulnerable component and longitudinal cracks develop along the tunnel.When the scaled distance is larger than 1.10 m/kg1/3,no cracks are observed in the experiments.When the BBRU is severely damaged,there are five cracks forming and developing along the roof.The roof is simplified as a clamped-supported one-way slab,proved by the observation that the maximum strain of the transverse bar is much larger than that of the longitudinal bar.Dynamic responses of the roof slab are predicted by dynamic Euler beam theory,which can consistently predict the roof displacement under large-scaled-distance explosion.Compared with the UUT reinforced with steel bars,the BBRU has advantages in blast resistance with smaller deflections and more evenly-distributed cracks when the scaled distance is smaller than 1.260 m/kg1/3 and the steel bars enter plastic state.Longer elastic defamation of the BFRP bars endows the UUT more excellent blast resistance under small-scaled-distance explosions.     

A cooperative interference resource allocation method based on improved firefly algorithm

To deal with the radio frequency threat posed by modern complex radar networks to aircraft, we researched the unmanned aerial vehicle (UAV) formations radar countermeasures, aiming at the solution of radar jamming resource allocation under system countermeasures. A jamming resource allocation method based on an improved firefly algorithm (FA) is proposed. Firstly, the comprehensive factors affecting the level of threat and interference efficiency of radiation source are quantified by a fuzzy comprehensive evaluation. Besides, the interference efficiency matrix and the objective function of the allocation model are determined to establish the interference resource allocation model. Finally, A mutation operator and an adaptive heuristic are integtated into the FA algorithm, which searches an interference resource allocation scheme. The simulation results show that the improved FA algorithm can compensate for the deficiencies of the FA algorithm. The improved FA algorithm provides a more sci-entific and reasonable decision-making plan for aircraft mission allocation and can effectively deal with the battlefield threats of the enemy radar network. Moreover, in terms of convergence accuracy and speed as well as algorithm stability, the improved FA algorithm is superior to the simulated annealing algorithm (SA), the niche genetic algorithm (NGA), the improved discrete cuckoo algorithm (IDCS), the mutant firefly algorithm (MFA), the cuckoo search and fireflies algorithm (CSFA), and the best neighbor firefly algorithm (BNFA).